Showing posts with label How To. Show all posts
Showing posts with label How To. Show all posts

2 Quarter Round Install How-To

>> Thursday, January 31, 2013

Back at it in the kitchen! You only thought you were free of my floor reno ramblings.

Last I left you, the tiles were freshly grouted, but one huge eyesore was keeping this floor from the finish line. Time to add quarter round along the edge of the baseboards.

IMG_6418IMG_6427

While I’ve heard rumors of some installing quarter round with a good old fashioned hammer and nail, a brad nailer and air compressor knocks this project out in practically no time. I found this 2” brad nailer on Amazon for around $40 and it has worked like a charm for my simple purposes.

IMG_6420IMG_6421


I was lucky enough to have a hand-me-down air compressor given to me a couple of years ago…

IMG_6423

…and the miter saw that I picked up as a little happy birthday gift for myself a few years ago.

IMG_6425

On to the cutting. I started in this corner where the laundry room door ends and cabinets begin. I had to add a small piece of new base trim before I could get started with the quarter round since my door demo got a little out of hand.

IMG_6426

I cut the quarter round at 45 degree angles where they met at the corner. The edge of the quarter round that ended where the door trim began, I cut at a 22.5 degree angle. Why 22.5? I seem to remember a DIY quarter round YouTube video that told me to do this, so I went with it. I’ve also seem tons of homes with quarter round cut straight at the edges.

image

A few pops with the brad nailer and these babies were secure.

IMG_6441IMG_6443IMG_6444IMG_6450



Next on the agenda: wood filler, caulk and PLENTY of paint.


Cara Signature

Read more...

1 It’s a grout party…and you’re invited!

>> Tuesday, January 29, 2013

Happy House-iversary to my little construction site! Three years ago, I moved into my 1960s ranch house complete with filthy carpet (that has since been removed to uncover the original hardwoods), a dark and dated kitchen (which has since been lightened and brightened), a terribly leaky master bathroom (that has since been gutted to the studs & remodeled) and a Pepto-Bismol pink guest bathroom…that is still Pepto-Bismol pink.

 



Technically, yesterday was my 3 year house-iversary but sometimes a girl just gets busy. We’ll count today as the birthday party, and I can think of no better way to celebrate than by grouting the newly tiled kitchen floor. Who’s with me?!

Last I left you on this project, the groutable vinyl tiles were set in place and looking fine. I’m actually super pumped with the way they turned out. If you are looking for a less labor intensive (and less expensive) flooring option, give these guys serious consideration.

Here is an up-close glimpse of the kitchen floor post tile install/pre-grout…

IMG_6395

Now for the tools: Pre-mixed grout (you can mix your own for slightly less money, but I was up for the shortcut), a grout float (more detail on this in a bit), a sponge and bowl of clean water.

IMG_6392

Whoever wrote the instructions on the box of tiles was very insistent that the novice grout applier (ahem, me) not smear grout over the entire tile but only as close to the tile joint as possible.

IMG_6397

They spoke, I listened. Terrified of ruining the new tiles that we’d so carefully placed, I used a 2” margin float for this gig.

IMG_6400

Time to get to work with a little maneuver I like to call the scoop, slap, swipe & scrape.

SCOOP a hearty clump of grout onto the float.

IMG_6403

SLAP the grout on the corner joints.

IMG_6404

SWIPE grout into the joint. I used small diagonal motions to make sure the grout filled the joint without smearing grout all over the tiles.

IMG_6405IMG_6406

SCRAPE the excess grout from the tile. I just held the float at a 90 degree angle and, well, scraped.

IMG_6408

I repeated the process over a few tiles but as the back-of-the-tile-box man told me to, I stopped every few feet or so to remove the excess grout so that it would not dry on the tiles.



IMG_6410

Using a sponge & clean water, I rubbed the tiles in a circular motion to remove the extra grout.

IMG_6411IMG_6412IMG_6419

Once all of the tiles were grouted, I made sure to grout the gaps between the tiles and door trim, since those portions won’t be covered by new quarter round like the edges of the room would be.



IMG_6414

24 hours later, the grout was completely dry. I carefully walked on them well before the 24 hours was up, but furniture and puppy toenails dare not set foot until the grout was completely solid.

IMG_6418

Cara Signature

Pin Me
tile grout

Read more...

2 Door Install Date Night

>> Monday, December 3, 2012

This weekend Michael and I celebrated the one year mark since our first date and also one month of living under the same roof, so of course we had to celebrate. What better way to honor the occasion than with dinner, a bottle of wine and a two-man DIY project? Nothing says ‘Happy Anniversary’ to my heart like ripping out a 50 year old laundry room door and installing a brand spanking new one.

With the laundry room reno underway and the hot water heater relocated to allow a future doorway connecting the kitchen to the laundry room, the next to-do on the list was to install new exterior doors to the laundry room.

Note: Don’t psych yourself up for sweet step-by-step how-to pictures since the majority of this DIY was spent making sure the door didn’t fall and smash one of us which doesn’t lend itself well to snapping progress pics.

This sad little door was well past its prime and the first step was to remove the door from its hinges and tear out the entire frame with our exceptional crowbar technique.

Laundry Before_10

(This is where I would normally insert a demo pic, but Michael and I must have been more concerned about keeping the soles of our feet free of rusty nails.)

Next, we were off to pick up three new exterior doors. Two for the laundry room and one for the kitchen entrance from the carport.

Photo Dec 01, 2 10 40 PMIMG_6144
The good news is we only had one hiccup with this install. The pre-fab trim around the new door frame was one inch too wide to fit in the demo-ed opening.

image

Using our trusty crowbar, we carefully removed the trim so that the door would fit.


IMG_6147

Once the door was in place, we literally just followed the directions included with the door to secure it into place.

s

We still have to fill the small gaps around the frame with insulation and finish out with trim and paint, but how’s that for romance? A safe and secure laundry room door for two.


Cara Signature

Read more...

0 Super Simple DIY Mirror Makeover

>> Monday, July 2, 2012

Need a pick me up for a boring bathroom mirror? Sharon at Elizabeth & Co. has a few tricks up her sleeve to help you out.



imageimageimage

I DIY framed my bland mirror in my pink bath last year (click here to read How To Save a Mirror for $20) and it made a world of difference. Super simple and dirt cheap—just the way I like it!

clip_image002

Read more...

7 DIY Floor Mirror Wrap Up

>> Friday, June 22, 2012

The past few weeks, my master bedroom has been receiving a lot of love. From the mannequin-stand-turned-faux-lamp to the recently framed fashionistas and now a DIY floor mirror, this spot has been hot on the DIY bandwagon. My master hasn’t received much attention in the longest, so it’s high time this space gobbled up a little TLC.

I’m super excited to top of this week with the after shots of the DIY floor mirror I’ve been working on for the past couple of days. Let’s dig in…

Earlier in the week, I rounded up a simple mirror from Walmart and all of the supplies I needed to kick this project into high gear…

IMG_5031IMG_5034IMG_5037

Then it was out to the carport to get busy. I started by measuring the wood and knew I needed two 48” and two 12” boards cut at a 45 degree angle on each end. I used the miter saw I bought myself as a little birthday happy a couple of years ago to make the cuts, but if you aren’t ready for such commitment, Shanty 2 Chic used a much less expensive method. You can also just have the hardware store make the cuts for you for practically nothing.

Mirror_3

Once the cuts were made, I lined up the boards to make sure they fit together and used a staple gun on the corners (of what would be the backside of the frame) to hold the boards in place.

Mirror_2Mirror_6

A thin bead of Gorilla Glue along the seams for added support—a little goes a loooooong way—and a quick coat of dark walnut stain…


Mirror_4

Once the stain was set, I flipped the frame over and used a little mirror adhesive and a bit more Gorilla Glue to mount the mirror to the back of the frame. Let dry over night and I had a fancy pants new floor mirror to add to my master bedroom for just $35…

IMG_5053IMG_5051

clip_image002

Read more...
Related Posts with Thumbnails

  © Blogger template Simple n' Sweet by Ourblogtemplates.com 2009

Back to TOP